Pool cues and their tips need to be maintained. They are fragile. So, here is an article where we have researched & listed the perfect pool cue tip glue for you. This will keep your cue in good condition.
Table of Contents
How To Maintain The Health Of Your Pool Cue Tip? (3 Easy Ways)
Your pool cue tip is actually the most important part of your cue. It is the part that comes in contact with the cue ball, so it should be able to transmit force evenly. There are a number of practices you can follow to maintain the health of your cue tips. Some of them are:
- Chalking the cue tip – This is the process of applying a thin layer of chalk all over the pool cue tip. This leads to the generation of friction between the ball and the cue tip and proper transmission of force between the two. The proper way of chalking a cue tip is to use side-to-side motion with a light hand. Never attempt to screw the chalk into the pool cue as this will damage it. Also do not blow on your pool cue tip after application. The moisture in your breath will make the chalk cakey and eventually destroy the tip as well.
- Rounding – This is the process of ensuring that your pool cue tip is round so as to make good contact with the ball. You will need a scruffer for this. All you have to do is place your pool cue tip into the scruffer and twist the shaft a few times.
- Roughing – This is the process of ensuring that your pool cue tip still has a bit of ridge and furrows. Repeated shots might lead to smoothening of the pool cue tip. Roughing it ensures there is just enough rough surface to generate friction that will add momentum to the shot. You can use a scruffer for this too, and rough out the surface using side-to-side motions.
Performing these functions repeatedly will ensure that your pool cue tip works well. There is no fixed time frame as to when they should be performed, so you can play it by ear.
It doesn’t really matter how expensive or cheap your pool cue stick is, the tip of the cue is going to be worn out at some point in time. It could also be that you have changed the tip on your pool cue stick and the tip keep falling off, the main cause of that could simply be poor glue selection. Truth be told is, not because the glue can hold a piece of paper together means it can hold a leather cue tip to a hard cue stick and be durable.
What I always see occurring is that after some persons have changed the tip on their pool cue stick and it keeps falling off, they always want to blame the pool brand or the stick in general instead of thinking that they may have not used the correct glue for the situation at hand.
Below I will be listing the 3 amazing pool cue tip glue that is now on the market, long-lasting and easy to use. The glue selection is not just random glues, all glues are glues that I myself have used alongside other professional players of the game.
The next most important thing to keep in mind before you add the glue to the surface of what you are glueing, please make sure the surface is well smooth down and clean. This can also be the reason why the tip not holding for a longer period, due to the dirt and the glue all mixed up, without further due let us jump into the list.
Our Handpicked Collection Of 3 Amazing Pool Cue Tip Glue
|Loctite Liquid Professional Super Glue||Editors Choice||Check Price|
|Gorilla Super Glue with Brush & Nozzle||Best Buy||Check Price|
|TIGER Glue for Billiard Pool Cue Tips||Most Accurate For Pool Tips||Check Price|
1. Loctite Liquid Professional Super Glue – Editor’s Choice
The Loctite super glue sits high on the top of this listing, this super glue actually does what all super glue should be doing.
The Loctite super glue is extremely great with holding wood, rubber, plastic and leather material, therefore, holding a leathered tip to the ferrule is second nature for this glue.
I personally recommend using this specific glue on your pool cue tip, I have used it over the years and I have nothing bad to say about this glue in terms of durability and performance-wise.
Is like there is no end to how amazing this glue is, it dries very quickly, so if you are even in the middle of your game and your tip chooses to fall off, the glue takes 10-15 seconds to set and your back in the game again. As a professional or any league players of the game, we very much know how important our cue accessories can be to us and having a good glue on us at all times is important as well.
The pool cue sticks aside, this glue can almost glue anything in your household that’s been broken or damaged, it’s an excellent glue for your pool cue case as well if it’s been torn up as well. This glue is less messy than most due to its clearly built structure, a next thing is atmospheric changes do not affect the durability of the glue.
- It’s super good with leather, wood, china, metal, rubber, ceramic, paper, and most plastics.
- Quick-dry 10-15 seconds
- Can withstand cold or heat waves
- Low viscosity
- Tall beak for hard-to-reach spots when applying glue
- The long beak easily blocks up if left open for over 60 seconds.
2. Gorilla Super Glue with Brush & Nozzle – Perfect buy
When you hear the term Gorilla, you already know it is signifying that it’s a beast. This glue will almost glue anything you give it, I’ve only used this glue once and it worked well for the task I had at hand for it.
This super glue carries a special feature that most glue does not have, a small brush, with the gorilla glue you can choose between using the nozzle and the brush.
The main purpose of the brush is to give the user more control and to cause less mess, so they basically give us the choice to choose between using the brush or the nozzle however the nozzle is faster.
The liquid glue inside the tube is a bit on the thicker side of most super glues out there, it also carries a cloudy light grey look and it’s gonna get a bit darker when the glue is dried up as well.
Don’t be worried, it’s not gonna be that of a bothering big bright dried up glue look but it will leave something, I guess the brush is to make sure that nothing is on the outside to show the light cloudy look. That aside, the glue is strong enough to glue back up the pool cue stick that has been broken up to bits, and I bet the pool cue would still come out as straight as ever.
The bottom line is the gorilla super glue is a great super glue to use, it is very durable as well and quickly dries. Just take in mind that if u are looking a glue to totally hide something that has been broken and fixed up back this glue is not 100% accurate with that but it is guaranteed to hold for sure.
- Brush & nozzle features
- Perfectly suited for fabric, stone, plastic, metal, ceramic, rubber, paper
- Can be left open for a minute or 2 without hardening up
- Some may say its too thick
- The brush hardens after awhile
3. TIGER Glue for Billiard Pool Cue Tips – Accurate For Pool Tips
This specific glue was built exactly to hold your tip on your pool cue stick as if it had never fallen off in the beginning. A friend of mine used this glue on his pool cue tip and trust me, the cue tip has not fallen back off since that, am not going to lie, I have been hearing about this glue for a while now but I just always prefer to stick to the branding I know.
I was hearing so much about this glue for pool cue tips that I even start doing some in-depth investigations, I even sent out a message to all the members of my pool club and other friends as well to see what glue they had been using over the years, when I got back the results I was like, damn. 80% of them were using tiger glue, it is fully functional guys this glue is definitely the glue u should be using, the other glues are also a great choice as well.
The only benefit I see really with this glue is that it was specially built for the leather material to hold on the ferrule of the pool cue tip. The next thing is once you see the glue turns to a gel-looking substance it means that the glue has lost its strength and won’t be as good so, please check to see if it is thick or watery upon delivery.
- High performance (CA)
- Very Durable
- Especially for pool cue tips
- 10 to 20 seconds of glue time
- Dry up very fast
How To Change A Pool Cue Tip? (10 Simple Steps)
- Remove the damaged tip.
- Make sure the surface is clean and smooth by using a sharp object preferably a razor or knife.
- Remove all old glue off the ferrule, and make sure to sand smoothly with smooth sandpaper.
- After the ferrule is clean, wipe with dry a try material to make sure the surface has nothing left on it.
- Add selecting glue you have chosen above on the ferrule.
- Place the tip on top of the ferrule.
- Hold for at least 10 minutes, pressing the tip on the ferrule with little force.
- Remove any part of the tip that is wider than the ferrule.
- Shape the tip with a sander in the same circular body as the ferrule is shaped.
- Process completed you have easily changed your pool cue tip.
You can also check: